Find an experienced local architect near you

Quote for Wall Knock down and replaced with load bearing beam. Ceilings fixed and insulation replaced . Quote needed.

Hi, I’m looking for an experienced draftsperson/building designer to make minor revisions to existing architectural drawings for a dual occupancy project located at: 📍 69 & 71 Jesson Crescent, Dandenong VIC 3175 📐 Project Status Subdivision complete (separate titles) Architectural drawings completed (DWG + PDF available) Structural engineering completed NatHERS + Whole-of-Home energy reports completed 👉 Project is ready for building permit stage 🔧 Scope of Work (MINOR UPDATES ONLY) Add energy compliance notes to plans: Induction cooktop Electric oven Reverse cycle split system heating/cooling Heat pump hot water system (min. 17 STCs – Zone 4) Solar PV system (~2.5kW, west facing, 22.5° roof pitch) Window update (ventilation compliance): Bedrooms (Bed 1 & Bed 2) windows currently fixed Change to awning/openable section Apply consistently to both ground and first floor Minor drafting adjustments: Maintain consistent window heights: ~40cm from ceiling ~35cm from floor Add small highlight window to external doors (for natural light) General review: Confirm boundary alignment between both dwellings Ensure drawings are suitable for building permit submission + energy endorsement 📦 Deliverables Required Updated DWG files Updated PDF drawing set (permit-ready) ⏱️ Timeline Looking for fast turnaround (2–5 days preferred) 💰 Budget This is a minor update job only Please quote accordingly (not a full redraw) 📎 Files Available Full DWG architectural set Engineering drawings Energy report 👉 Everything ready — just needs updates ⚠️ IMPORTANT Must have experience with Victorian building permits / NCC compliance Please confirm you can work with existing DWG (no redraw)

Looking for a draftsman/building planner to do a commercial floor plan and concept plan as soon as possible.

10 years off experience Work with honesty

Considering options for type of door that can be installed to maximise usable space in existing rooms. Need ASAP - ideally today, as in need of a second opinion. With a view to then also providing a quote to supply design drafts and DA plans for alterations to existing dwelling of front dormer window and rear roof extension.

Looking for an architect or experienced building designer to help with renovation plans for my house in Bayview (Northern Beaches). I already have a clear brief — need someone who can take that and turn it into a practical, well-thought-out design and drawing set for a reno. Important: This is a Northern Beaches property, so experience working on homes in **bushfire-prone / sloped / planning-sensitive areas** is important. I’m not looking for someone learning on the job — ideally you’ve done projects around Bayview / Newport / Church Point / Ingleside and understand how to design within those constraints. What I need: * Turn my brief into a clean, buildable design * Practical layout thinking (not over-designed) * Someone who can move reasonably quickly * Ability to flag any obvious planning / approval considerations early I don’t have a huge budget, so I’m looking for someone solid and efficient rather than high-end. When replying, please include: * Examples of similar reno work (especially Northern Beaches if possible) * Rough turnaround time * Ballpark cost Looking to get started ASAP.

House extension adding bathroom and one room

Need to draw a floor plan on a Council for a share accommodation approval. Need basic measurement and drawings so the building survey I can apply for the permit.

Windows and doors frames need to be replaced

We recently built a new home. After moving in, my landscaper built a retaining wall that was slightly over the allowable height. Our council has now requested for below: "Architectural plans (marked “as built”) including Site, Stormwater and Elevation Plan"

Please confirm you have experience with Monash council submissions in Victoria (Report & Consent or building permit drawings). I need an experienced draftsperson / architect to prepare drawings for a front fence and gate for a Report and Consent application to Monash Council (Victoria). Scope of work: - Prepare a Site Plan (1:100) showing: • Property boundaries • Existing dwelling • Proposed front fence and sliding gate • Driveway location • Basic neighbouring building context • North point - Prepare Fence Elevation drawing (1:100): • 1.5m high aluminium blade fence (horizontal slats, semi-transparent) • Sliding electronic gate (same design) • Clearly labelled dimensions and materials - Include key notes required by council: • Fence height (1.5m) • Material: aluminium blade (semi-transparent) • Gate type: sliding • Indicate that sightlines at driveway are maintained Purpose: These drawings will be submitted for a Report and Consent application (Regulation 89 – front fence height variation). What I will provide: - Property address - Photos of front yard and driveway - Approx dimensions / sketch if needed Deliverables: - PDF drawings (ready for council submission) - Scaled (1:100) and clearly annotated Experience required: - Experience with council drawings / building permit / Report & Consent in Victoria preferred Timeline: ASAP (within a few days preferred) Please include examples of similar work if available.

Looking for someone to visit my house in Revesby and create a measured floor plan in CAD of the entire house. The plan should include: • wall measurements • room sizes • window and door locations • ceiling height • kitchen area • outdoor patio I need the files so I can send them to kitchen manufacturers and builders for renovation planning. Preferred output: • DWG or PDF floor plan • accurate measurements. House is approximately 100–130m². Please bring your own measuring tools or laser.

I need a floor plan of my property to create a fire evacuation plan for an Airbnb listing.

Doing a house renovation/extension. Need brickwork done around sliding doors, aircon & windows - upstairs and down. Materials supplied

Looking for a professional plumber for a house renovation job

I am looking for someone to draft the current floor plan of a single story 5 bedroom, 3 bathroom house. Simple layout with wall length, height and thickness measurements and area.

Paint a Double Garage conversion with 2 coats of white, all walls and ceiling will be undercoated and ready for your finishing touch. I have the paint ready to go or provide your own whatever works. - Ceiling paint, Taubmans - Wall paint, Dulux low sheen Vivid White - Woodwork paint is British Paints H2o water based Enamel semi gloss white

Floorplan for a home on land with 14 frontage

Design a detailed floor plan for a house that maximizes space efficiency while ensuring comfort and functionality. The layout should include key areas such as a living room, kitchen, bedrooms, bathrooms, and storage spaces. Prioritize an open concept for the common areas to enhance flow and natural light. Consider modern design elements like large windows, flexible room usage, and smart home integration. The plan should also accommodate any specific client preferences, such as eco-friendly features or accessibility requirements. Provide measurements, room placement, and any additional design notes that contribute to the overall living experience. Further details can be discussed over phone

Please provide a floor plan for laundromat with detailed diagram We need accurate internal wall-to-wall measurements: Where are the utilities located Deliver 2 Full Floor Plans 1. Full Equipment Layout (accurate spacing, power, drains, venting) 2. Customer Experience Plan (movement flow, signage, lighting zones) Wall elevations • Bench & locker placement • Dryer duct route • Wash cycle display wall