Find a professional staining service near you

Sand back my staircase that has 14 steps and then restain it a darker caramal colour to match floorboards.

The timber is to be sanded and stained. If anyone is available is have a look and attend to the job, that is great.

Sand and Stain Deck about 4.5 m by 5.5 m plus a corner about 2 m by 3.5 m Some nails popped up - please replace with screws Sand and Stain outdoor furniture Fix outdoor staircase as shown

Need to have a professional remove / buff / hone some marble in our bathroom that is stained and then reseal (if possible)

I am looking for a metal fabricator or experienced handyman to modify and improve the LPG gas cylinder area on my food truck. Currently the cylinders are mounted outside the truck .I need someone to build or modify a proper metal enclosure/compartment for the gas bottles and a 65 kg petrol generator to make it safer, secure and compliant for a food truck setup. Work Required • Inspect current LPG bottle setup • Build or modify metal enclosure / cabinet • Ensure proper ventilation for gas safety • Install secure mounting brackets for cylinders • Make it weatherproof and lockable if possible • May require cutting, welding and installing metal panels

My decks need to be cleaned and then re-stained with 2 coats of decking oil. I have a small front porch, a ramp off the laundry, a medium deck, and a large deck. Labour only needed - I will provide the oil and cleaning products.

“I want to sand and restain my wooden floor to change its colour.”

Need stain repaired and floor restored just in this one area

Hi, I’m looking for someone to do a cosmetic cover-up of a small mould patch on a ceiling in my apartment. This is NOT a full mould removal job — strata will be handling that later. I just need it to look clean and presentable as strata keep delaying the date of repairs. Scope of work: Clean/wipe down affected area (mould treatment spray) Apply stain-blocking primer (to prevent marks coming through) Repaint ceiling area to blend in Details: Area is small (see photos) Standard ceiling height Ideally someone with painting/handyman experience Important: This is a quick, cosmetic job only Not expecting full remediation. Timing: This week if possible. In Highgate. Budget: Looking for reasonable quotes (this should be a quick job) Thank you so much !

Stain our deck in the backyard and enterance

The porch/entry to my house is decked. It requires a restain. One edge needs to be resecured squarely. Area is less than 2.5 sq metres

On our bathroom quartz engineered stone bench top it appears the surface has approx 6 small round white bleach stains. We would like these repaired professionally so that they are not visible.

Stain the fence posts. Will provide stain and brush. Front fence (one side), side fence (both sides).

We need someone to put some screw to secure the shelf into the stainless steel bench. Easy job if you have the right tools

I have a small rectangle 1m x 3.5m of floor that needs to be sanded and stained with Brown Japan - need it to be done ASAP this weekend. Can be a simple Jobs doesn’t need a giant sanding machine. Understand that is not best finish but it’s a small thing don’t over cook it I don’t have tools or Brown Japan stain - materials on top

Timber decking requiring surface preparation and staining or oiling. Approximately 32 m².

Require a small 2x8 deck area to be able pressure washed, lightly sanded and re-stained. Stain will be provided.

Tile inserts for drains need to be shortened by cutting and rewelding ends back on. 4 of them to do. Can bring them to you if not too far to travel.

I have new driveway stainless gutter partiakly installed - its bottom embedded in concrete. It is 4.5m long and 250mm wide. It consists if 5 joints and 5 grills on top. The edges of them do mot quute match to eash other. I want the edjes bent bit and welded together, so they look nice. We can put some patch on the outside to make it stronger. Also need to weld stainless bolts/handles on the sides to be embedded in concrete, so the edges stick to concrete and do not push on the grills. II gave my estimate based on 3h job. I will pay more if we need more time. On the other hand, if you finish earlier I have other similar tasks to weld to use my 3h. I will be helping you. We can discuss details over the phone. This is a frontyard job, so it has to look nice. I expect you having over 2 years experience doing stainless weldings, and a proper welder and other welding tools. The quote should include your consumables like gas and stainless wire. I have 10A power points nearby.

We need a painter to stain our new very large front door, 2 sliding glass doors, and one large window. Inside and outside. All Tasmanian oak. I have the stain and the brushes already.